NEC Express 320Lc-R - Manual (Page 85)

Windows Setup 4-41
6. Start “RDR Utility”, right-click the mounted disk and click [Add RDR Virtual Disk].
IMPORTANT:
If the mounted disk has not been initialized on Windows, RDR will be configured and
synchronization will be performed automatically. Therefore this operation is not required.
Go to 7 and check the duplication status.
TIPS:
The display of the disk (to which RDR is set) on the left tree changes like the
following:
Disk (Harddisk0) → Disk (Harddisk0-LUNx-PLEXx)
If the mounted disk is not displayed on “RDR Utility”, click [Action(A)] then
[Refresh(R)] from the menu (or press F5) to update the display.