NEC Express 320Lc-R - Manual (Page 124)

Troubleshooting 6-5
(a) Insert the Windows Server 2003 CD-ROM into the drive.
(b) When the CD is set, reset the system (press Ctrl + Alt + Delete) or press the
power switch to power off and on to reboot the NEC Express5800/ft series.
(c) When the following message appears, press any key to start up from the
CD-ROM.
IMPORTANT: Press any key while the message is displayed.
Otherwise the system will be started up from a hard disk and Recovery
Console will not be started.
(d) When the following message appears on the screen, press F5 + F6 quickly.
IMPORTANT: Unless F5 + F6 keys are pressed, Recovery Console
does not start up. If the screen for selecting HAL as described in 3 does
not appear, reboot the system and start again from activation of Windows
Server 2003 CD-ROM.
3. When you see the screen for selecting HAL, follow the steps below.
(a) Select “Other” (default) and press Enter.