NEC Express 320Lc-R - Manual (Page 30)

2-2 About Operating System
Installing Windows Server 2003
For installing an operating system on NEC Express5800/ft series, use NEC EXPRESSBUILDER.
IMPORTANT: The NEC Express5800/ft series is a precision instrument. You should ask
maintenance personnel to install it.
The ft series setup program is exclusively used for the NEC Express5800/ft series. To execute the
setup program, simply select the item [Setup] from the menu displayed when starting the system
through the provided CD-ROM "NEC EXPRESSBUILDER.” The setup program automatically
performs the complete setups from hardware internal parameter/status settings to installation of the
operating system (Windows Server 2003) and various utilities.
Use the ft series setup program for the first installation and reinstallation of the operating system.
This program accomplishes complicate setups.
Before performing the ft series setup, contact your sales agent about the latest release of ft control
software.
About OS installation
Read the notes here carefully before installing the operating system.
Operating System Supported by the NEC Express5800/ft series
The operating system that NEC Express5800/ft series supports is Microsoft® Windows® Server
2003 Enterprise Edition (Without SP) (English). Hereinafter called "Windows Server 2003".
IMPORTANT: You cannot use the OS media which service pack is applied.
If OS media which service pack is applied is used, applying service pack or Microsoft update
module may fail during installation. Perform installation again using OS media which service
pack is not applied.
NEC Express5800/ft series does not support any operating systems other than the above (e.g.,
Windows Server 2003 Standard Edition, Windows 2000 Server or Windows NT 4.0).
About Windows Server 2003
Use the ft series setup program to install Windows Server 2003. Note the following at installation: