Received numbers configuration, To map received numbers to the dn, Internal reference – Nortel Networks SRG50 User Manual
Page 59
Chapter 5 IP telephones setup and configuration
59
SRG50 Configuration Guide
Received numbers configuration
The Public Received number length and the Private Received number length (see
on page 67) determine the number of digits that the SRG retains for call processing.
The retained digits are mapped to the DN using fields provided on the Target Lines panel. (For
more information on target lines, see
To map received numbers to the DN
1
In Element Manager, navigate to Configuration > Telephony > Lines > Target Lines (see
the figure
2
Select the target line of the DN for which you want to configure the received numbers.
3
Double-click the Pub. Received # field, and then enter the retained received digits for calls
originating from the PSTN.
4
Double-click the Priv. Received # field, and then enter the retained received digits for calls
originating from the private network (that is, the VoIP trunks). This number is usually the same
as the DN.
Figure 10 Target Lines panel
Note: If the retained digits are the same as the DN, the fields (Pub.
Received # field and Priv. Received # field) can be left blank.