Nortel Networks SRG50 User Manual
Page 30
30
Chapter 3 Task summary
NN40140-500
NN40140-500
2
Configure VoIP trunk QoS settings.
Configuration > Resources > Telephony Resources > Modules panel > IP Trunks row >
H323 Media Parameters tab or SIP Media Parameters tab
QoS settings (codec, jitter buffer, and related items)
External Reference: Networking Configuration Guide (NN40020-603)
3
Enable or disable fallback.
Configuration > Resources > Telephony Resources > Modules panel > IP Trunks row >
H323 Settings tab or SIP Settings tab
Internal References:
External Reference: Networking Configuration Guide (NN40020-603)
4
Configure H323 settings.
Configuration > Resources > Telephony Resources > Modules panel > IP Trunks row >
H323 Settings tab
External Reference: Networking Configuration Guide (NN40020-603)
5
Configure SIP settings.
Configuration > Resources > Telephony Resources > Modules panel > IP Trunks row >
SIP Settings tab
External Reference: Networking Configuration Guide (NN40020-603)
6
Assign VoIP trunks to a line pool (if default configuration has not been maintained).
Configuration > Telephony > Lines > Active VoIP Lines
External Reference: Networking Configuration Guide (NN40020-603)
Note: In configuring SIP trunks, the SRG BCM shall register itself with the configured H323ID with NRS
in CS1000. It is with this ID, the SRG will get MOTPS IP address from NCS.
7
Assign PSTN trunks to a line pool (if default configuration has not been maintained).
Configuration > Telephony > Lines > Active Physical Lines
External Reference: Networking Configuration Guide (NN40020-603)
8
Assign remote access packages to the VoIP trunks.
Configuration > Telephony > Call Security > Remote Access Packages
External Reference: Networking Configuration Guide (NN40020-603)