Nortel Networks SRG50 - Manual (Page 19)

Chapter 2 SRG50 overview 19
SRG50 Configuration Guide
Supported devices
The SRG50 Release 3.0 supports:
• IP Phones 1110, 1120E, and 1140E
• IP Phone 2001, 2002, 2004, 2007, and 2033
• IP Phone Key Expansion Module (KEM) – The IP Phone KEM is supported on an
SRG with normal mode IP Phones. It does not function with local mode or test local
mode IP Phones.
• IP Softphone 2050 v1/v2 and Mobile Voice Client (MVC) 2050
• WLAN Handsets 2210, 2211, and 2212
• WLAN Handsets 6120 and 6140
• WLAN Handsets 1210, 1220, and 1230
• Analog (500/2500 type) telephones
• Analog devices such as fax machines
Note: Throughout this document, the IP Phones in this list are referred to collectively as
IP Phones.
The SRG50 is positioned primarily to support IP telephones and clients. However, analog devices
can be supported using analog station modules (ASM), or by using an analog terminal adapter
(ATA2) in conjunction with a digital station module (DSM). The SRG50 does not support digital
or ISDN telephones.
CS 1000 Adaptive Network Bandwidth Management N/A Yes
CS 1000 Alternative Call Routing N/A Yes
CS 1000 Emergency Services Access N/A Yes
Firmware Download from main office call server N/A Yes (CS 1000 Release 4.0, 4.5, 5.0, and 5.5)
(CS 1000 Release 4.0 requires patch
MPLR22418)
SRG-specific features for interaction with a main
office call server, including: Heartbeat detection of
WAN recovery; IP telephone redirection to main
office in Normal Mode; Local Mode IP telephone
interface; H.323 Gateway to PSTN under control of
main office call server N/A Yes
Table 5 Comparison of BCM50 and SRG50 (Sheet 2 of 2)
Item BCM50 SRG50