Nortel Networks SRG50 - Manual (Page 40)

40 Chapter 4 CS 1000 considerations
NN40140-500 NN40140-500
Bandwidth management configuration: NBWM, ADBWM, and
ACR
To configure SRG for NBWM and ADBWM
1 Obtain the Virtual Private Network ID and the Zone ID numbers configured at the main office.
2 Use Element Manager to enter these numbers in the appropriate fields at Configuration >
Telephony > Dialing Plan > Private Network > Dialing Plan - Private Network panel > VoIP
subpanel (see the figure
Dialing Plan - Private Network panel, VoIP subpanel on page 40).
Figure 4 Dialing Plan - Private Network panel, VoIP subpanel
To configure Alternative Call Routing with attendant service
1 Complete the procedure, To configure SRG for NBWM and ADBWM on page 40.
For more information, see Outgoing calls configuration on page 74, and see also the
Networking Configuration Guide (NN40020-603).
2 Obtain the ALTPrefix for the SRG (configured at the main office).