Nortel Networks NN43001-315 - Manual (Page 92)

92 Installation and configuration of applications on Linux base
Figure 89
Primary Security Service fingerprint window
12 The nortel password screen appears. Type the password of the
nortel account and press Enter. The connection to the Primary
Security Service server is complete and the installation finishes.
The installation takes approximately 30 minutes to complete.
After the installation is complete the disk automatically ejects
from the drive and a summary of the installation is shown on the
screen.
For detailed information about Element Manager see Element
Manager System Reference—Administration (NN43001-632) () .
--End--
Installing the Primary Security Service, Subscriber Manager, and Element
Manager
Step Action
1 Log on to the server using the nortel account.
2 Insert the MGMT DVD in the DVD tray.
3 Enter the appinstall CLI command.
4 At the prompt, enter the root account password.
The system then prompts you to check the media.
5 Enter Y to check the media, or N to proceed without checking the
media, and press Enter.
6 The Application Installation screen appears, as shown in
Figure 90 "Application Installation window" (page 93) . From the
Application installation window select 4 to install the Primary
Security Service with Subscriber Manager and Element
Manager. The appropriate packages are installed to the hard
drive.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.