beautypg.com

Installing the nrs applications – Nortel Networks NN43001-315 User Manual

Page 71

background image

Install the CS 1000 applications

71

Primary ECM Server (install EM, Subscriber Manager, and the primary
ECM security service)

Backup ECM Server (install EM, Subscriber Manager, and a backup
ECM security service)

ATTENTION

The first Linux server must be installed with the primary security service. Install
the second Linux server with the backup security service, and then install
any other required Linux servers. After the installation is complete for each
installation option, you must log on to ECM and add the element (Network
Routing Service or Element Manager) that was installed on each server. For
more information about adding elements, see Enterprise Common Manager
Fundamentals (NN43001-116)
() .

Note:

You can install the Primary and Backup Security Service with

either NRS or EM. The load on the NRS server is usually heavier
than the EM server. To optimize the servers load balance, Nortel
recommends that if both EM on Linux and NRS Manager on Linux are
installed, then install the Primary Security Service with EM and install
the Backup Security Service with the Primary NRS server. In this case
the Secondary NRS becomes a security client of the Primary and
Backup Security servers.
If you are not installing EM on Linux, Nortel recommends that you install
the Primary Security Service with the Primary NRS server and install the
Backup Security Service with the Secondary NRS server.

At first logon to the Enterprise Common Manager (ECM) framework,
change the password. For NRS password guidelines see Network Routing
Service Installation and Commissioning (NN43001-564); for EM guidelines
see Element Manager System Reference—Administration (NN43001-632)
() .

If a password does not meet the policy requirements, the system rejects it.

For the following procedures, installation initiates configuration of the solid
database.

Installing the NRS applications

Use this procedure to run the application CD-ROM after the reboot is
complete for the Linux base installation.

Installing the Primary Security Service and Network Routing Service

Step

Action

1

Log on to the server using the nortel account.

2

Insert the NRS CD-ROM in the CD-ROM tray.

Nortel Communication Server 1000

Linux Platform Base and Applications Installation and Commissioning

NN43001-315

02.09

29 October 2008

Copyright © 2007–2008 Nortel Networks

.