Nortel Networks NN43001-315 User Manual
Page 137

IBM x306m server
137
The server boots and the Press F1 for Configuration/Setup
message appears on the maintenance terminal.
Note: If the server is already up and running, power the server
off and on or press the reset button to reboot and receive the
Press F1 for Configuration/Setup message.
2
Press F1 to invoke the IBM x306m server Configuration/Setup
Utility.
The Configuration/Setup Utility menu screen appears.
Figure 127
IBM x306m server Configuration/Setup Utility menu
3
Select the System Security option and press Enter.
4
Select the Administrator Password option and press Enter.
5
At this point refer to the manufacturer’s manual for specific
instructions on how to enable or disable the BIOS password.
--End--
For additional operating information see the Server Product Guide on the
resource CD-ROM shipped with the IBM x306m server .
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315
02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.