Nortel Networks NN43001-315 - Manual (Page 141)

IBM x306m server 141
The patch 0 has been deactivated successfully.
SEE ALSO pload, pout, pins, pstat, plis
5.50 2007-12-18 POOS(1)
Table 11
Nortel Linux base CLI commands
Command Description
appinstall Install Nortel applications.
appstart Stop, start, or restart Nortel applications.
appVersionShow Print the server’s application software version.
basefirewallconfig Configure firewall settings.
baseparamsconfig Configure base parameters.
baseVersionShow Print the server’s base software version.
datetimeconfig Configure the date and time.
dnsconfig Configure DNS values.
ecnconfig Configure Explicit Congestion Notification settings.
ftpdisable Disable FTP.
ftpenable Enable FTP.
ftpstatus Show the current FTP status.
hostconfig Configure the static lookup table for host names.
networkconfig Configure network settings.
ntpconfig Configure Network Time Protocol settings.
passwd Change the user’s password.
pins Put the patch in service.
plis Show detailed information about the patch.
pload Load the patch into the system database.
poos Put the patch out of service.
pout Unload the patch from the system database.
pstat Show a list of installed patches.
reboot Reboot the entire system.
routeconfig Configure routing entries.
swVersionShow Print the server’s software version.
sysbackup Perform a system backup (both base and applications).
sysrestore Perform a restore of the application data (backed up by sysbackup).
upgrade Select the backup data source and reinstall Linux base.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.