Nortel Networks NN43001-315 - Manual (Page 63)

Upgrading Nortel Linux base 63
Figure 47
Configuration validation 1 window
13 In the Configuration Validation 2 screen, type Y if the information
is correct and press Enter, as shown in n the
Figure 48
"Configuration Validation 2 window" (page 64) . If the information
is incorrect, type N, make the required changes, and then press
Enter.
Note: The CLI command hostconfig is used to modify the
static lookup table for host names. For a list of Nortel Linux
base CLI commands see
Table 11 "Nortel Linux base CLI
commands" (page 141)
The Configuration Validation 2 screen appears with the correct
information. Press Enter to continue.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.