Nortel Networks NN43001-315 - Manual (Page 130)

130 COTS Servers
A BIOS Serial Console Baud Rate configuration window
appears. This window presents you with four settings for the
serial port speed:
• 9600
• 19200
• 57600
• 115200
5 Navigate to the 9600 setting and press Enter .
This configures the serial port speed to 9600 b/ps.
The BIOS Serial Console & EMS configuration menu screen
reappears.
6 Press ESC to exit the BIOS Serial Console & EMS configuration
menu screen.
The RBSU menu screen reappears.
7 Press ESC to exit the ROM-based Setup Utility.
--End--
Setting the HP DL320 G4 server BIOS password
Step Action
1 Press Power to boot the server.
The server boots and the HP DL320 G4 boot screen appears.
Figure 119
HP DL320 G4 server boot screen
Note: If the server is already up and running, power the
server off and on to reboot and receive the HP DL320 G4
boot screen.
2 Press F9 to invoke the ROM-based setup utility (RBSU) menu
screen.
The RBSU menu screen appears.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.