Nortel Networks NN43001-315 - Manual (Page 72)

72 Installation and configuration of applications on Linux base
3 Enter the appinstall CLI command.
4 At the prompt, enter the root account password.
The system then prompts you to check the media.
5 Enter Y to check the media, or N to proceed without checking the
media, and press Enter.
6 The Application installation screen appears, as shown in
Figure 58 "Application Installation window" (page 72) . From the
Application installation window select 1 to install the Primary
Security Service with NRS. The appropriate packages are
installed to the hard drive.
Figure 58
Application Installation window
7 The Solid server configuration confirmation screen appears.
Confirm the server selection by selecting Yes, or return to the
Solid server configuration window by selecting No. Press Enter
to continue.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.