Nortel Networks NN43001-315 User Manual

Page 79

Install the CS 1000 applications

Figure 68
Primary Security Service fingerprint window

The nortel password screen appears. Type the password of the
nortel account and press Enter. The connection to the Primary
Security Service server is complete.

The installation takes approximately 30 minutes to complete.
After the installation is complete the disk automatically ejects
from the drive and a summary of the installation is shown on the
screen.

For detailed information about NRS, see Network Routing
Service Installation and Commissioning (NN43001-564) () .

--End--

Installing the Network Routing Service with ECM joining an existing secure
network

Step

Action

Log on to the server using the nortel account.

Insert the NRS CD-ROM in the CD-ROM tray.

Enter the

appinstall

CLI command

At the prompt, enter the root account password.
The system then prompts you to check the media.

Enter Y to check the media, or N to proceed without checking the
media, and press Enter.

The Application installation screen appears, as shown in

Figure 69 "Application Installation window" (page 80)

. From the

Application installation window, select 3 to install the Network
Routing Service with ECM joining an existing secure network.
The appropriate packages are installed to the hard drive.

Nortel Communication Server 1000

Linux Platform Base and Applications Installation and Commissioning

NN43001-315

02.09

29 October 2008