Nortel Networks NN43001-315 User Manual
Page 29
ECM Upgrade Procedures
29
There are several procedures in this section. Perform the first procedure
based on your system configuration:
•
“1a: Upgrade Primary server without Backup server and less than
three or no Member servers” (page 29)
•
“1b: Upgrade Primary server without Backup server and less than
three or no Member servers” (page 29)
•
“1c: Upgrade Primary server with Backup server and three or more
Then perform one or both of the following procedures as applicable to your
system configuration:
•
“Upgrade Backup ECM Security server” (page 31)
•
“Upgrade ECM Member server” (page 33)
This procedure describes upgrading the Primary ECM Security server from
Rls 5.00 to Rls 5.50 in a configuration with no Backup ECM server and
less than three or no Member servers associated with it.
1a: Upgrade Primary server without Backup server and less than three or no
Member servers
Step
Action
There are no prerequisites for this procedure.
1
Open a command line interface session to the Primary ECM
Security Server through the serial port with the nortel account.
2
Perform the
“Upgrading Nortel Linux base ” (page 54)
procedure.
3
Open a command line interface session to the Primary ECM
Security Server through the serial port with the nortel account.
4
Install the following patches onto the Primary ECM Security
server using the
“Patching Operation” (page 106)
procedure.
•
MPLR25520
•
MPLR25521
--End--
This procedure describes upgrading the Primary ECM Security server from
Rls 5.00 to Rls 5.50 in a configuration with a Backup ECM server and less
than three or no Member servers associated with it.
1b: Upgrade Primary server without Backup server and less than three or no
Member servers
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315
02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.