Upgrading nortel linux base – Nortel Networks NN43001-315 User Manual
Page 54
54
Upgrade Nortel Linux base
interfaces for the IBM x306m server. For a definition of ELAN and
TLAN see
“Network configuration” (page 143)
.
Note 2:
Use the CLI command
routeconfig
to add routing
entries. The choice of routing entries will depend upon the network
topology and application deployment. For a list of Nortel Linux base
CLI commands see
Table 11 "Nortel Linux base CLI commands"
You can change the base parameters after the upgrade is complete using
the CLI command
baseparamsconfig
. A change in the base parameters
can impact other application components. For example, if the current
server is the Primary ECM security server and the FQDN changes it is
necessary to reinstall the applications.
The CLI command
baseparamsconfig
is an umbrella command that
you can use to configure parameters for network settings, Network
Time Protocol settings, date and time settings, and DNS settings.
These parameters can also be configured individually by using the CLI
commands
networkconfig
,
ntpconfig
,
datetimeconfig
, and
dnsconfig
. For a list of Nortel Linux base CLI commands see
"Nortel Linux base CLI commands" (page 141)
.
Upgrading Nortel Linux base
Use the following procedure to upgrade Nortel Linux base.
The time required to upgrade the Linux base is approximately 20 minutes.
The time required to upgrade the Nortel Linux base applications is
approximately 1 hour. Additionally, 30 minutes is required for Enterprise
Common Manager (ECM) configuration.
Upgrading Nortel Linux base
Step
Action
1
Insert the Linux base installation CD for the latest release and
use the CLI command
upgrade
to begin the upgrade process.
You are asked to continue with the upgrade, as shown in
36 "Backup data window" (page 55)
. Type Y and press Enter
to continue. You are given the option to back up the data to an
external source. To back up data to an external source type
Y and press Enter. Select a backup media and supply the
necessary details. For more information about SFTP data back
up, see
“Network configuration for Secure File Transfer Protocol
(SFTP) data backup” (page 143)
Press Enter to continue.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315
02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.