Philips KX-PNBC8 - Manual (Page 87)

87
7.1.2 Create Print Queues
The print server must be assigned to at least one print queue on the file server.
• If the print queue that you want the Network Card to service already exists, and you
know the name of this queue, go to section 7.1.3 on page 87 .
• If you do not know the name of the queue, or it does not exist, use the following
procedure:
1. Choose Print Queue Information from the Available Options
menu, and press the ENTER key. A list of existing queues is
displayed.
2. To create a new queue, press the INSERT key. Enter the name of
the queue and press the ENTER key. You do not need to enter any
more information at this time.
3. Press the ESC key to return to the Available Options menu.
7.1.3 Enter the Print Server Name
A print server takes the print jobs from queues and sends them to the printer. Use this
procedure to specify the name of the print server:
1. Choose Print Server Information from the Available Options
menu, and press the ENTER key. A list of existing print servers is
displayed.
2. Press the INSERT key. The New Print Server Name box is
displayed.
Type the name of the print server into the entry box. The Novell print
server name is printed under Novell NetWare information on the
status page (refer to section
2.1.2 on page 10 for the print server
name).