Philips KX-PNBC8 - Manual (Page 30)

30
Setting Up Software of the IP Peer-to-Peer Windows Redirector
Manually
You can add printers manually whenever you cannot find printers automatically due to
the router setup or hop count setting. In general, this should not be necessary.
1. Click Start, move the pointer to Programs, then click IP-P2P.
The IP-PeerToPeer Setup window is displayed.
2. Click the Printers....
The Printers... window is displayed.
3. Enter information for the printer in all the fields described below.
IP Address: Enter the IP address of the printer you want to add.
Name: Assign a name to the printer. You can enter any name which you
feel identifies the printer.
Port: The port number of the printer. The default is 10001.
Description: Use this field to describe the printer location or the users who will
access the printer.
4. When you have entered all the information, click on Add. The printer
is listed in the Available Printers: box at the bottom of the window.
5. Click OK when you have finished adding all the printers you want to
add.
If you are using Windows NT 4.0, restart the system.