Philips KX-PNBC8 - Manual (Page 128)

128
LED Patterns And the printer is... THEN THE NIC... Operating
Condition
Green LED is ON
solid. First powered on. Is performing self-tests. Normal
Awaiting print jobs. Is functioning properly. Normal
Green LED - blinks
3 times and stays
on. Finished with self-tests. Prints out the status
page. Normal
Green LED blinks
rapidly. Performing self-tests. Detects bad RAM chip. Error
Green LED blinks
rapidly 4 times then
pauses. Performing self-tests. Failed the Ethernet
hardware self-test. Check
the network. Error
Amber LED blinks
short for 10
seconds. Amber
LED goes off and
the Green LED
blinks continuously. Performing flash
memory self-tests Did not pass the
checksum test. Unit
automatically goes into
download mode and
awaits flash update. Error
Green LED blinks
slowly. Awaiting print jobs
sometime after
power-on completes. Some printer interface
error. Error
Green LED blinks
rapidly. Awaiting print jobs. Has lost its NetWare
connection to file server. Error
Green LED
alternately blinks
with amber
indicator. Finished with power-on
sequence. Has been reset to factory
defaults. Power off and
move jumper OP2 to OFF
position. Error