2 network card installation – Philips KX-PNBC8 User Manual

Page 11

Text mode
Original mode

2.2 Network Card Installation

Important

: Before installing the Network Card you should discharge any static electricity

by touching any exposed metal surface on the printer,

while the printer is

still plugged into a grounded AC outlet

To prevent damage, be sure to turn OFF the printer when installing/
uninstalling the Network Card.
Do not touch any electrical components on the surface of the board to avoid

static electricity.

Perform the following steps to install the Network Card.

1. Turn OFF the printer.

2. Remove the two screws and the Ethernet cover.

Important

: Keep these screws safe, they are used to secure the Network Card.

Keep the Ethernet cover for future storage of the Network Card.

Ethernet cover

Screws