Philips KX-PNBC8 - Manual (Page 34)

34
For Windows NT 4.0
■ If the printer driver is already installed
Set up the printer port.
1. Click Start, move the pointer to Settings, then click Printers.
2. Using the right mouse button, click the printer with the Network Card
installed.
3. Click Properties.
The Panasonic KX-P8415 Printer Properties window is displayed.
4. Click the Ports tab.
5. Click on the check box of the printer port specified in the IP Peer-to-
Peer Windows redirector.
6. Click OK to close the printer properties window.
If you wish to use the separator page, proceed to “Setting up the
separator page” on
page 37 .