Philips KX-PNBC8 - Manual (Page 35)

35
■ If the printer driver is not installed
Install the printer driver and set up the printer port.
1. Insert the KX-P8415 CD-ROM into your CD-ROM drive.
2. Click Start.
3. Click Run.
4. Type in your CD-ROM drive name followed by :\SETUP.EXE.
5. Click OK.
6. Follow the instructions on the screen and select a language.
The Welcome window is displayed.
Note: If the language selection window is not displayed, proceed to step 7.
7. Click Next>.
The Choose Destination Location window is displayed.
8. Click Next>.
The Add Printer Wizard window is displayed.
9. Select My Computer, then click Next>.
10. From the Available Port: box, select the printer port specified in the
IP Peer-to-Peer Windows redirector.
11. Click Next>.
The Add Printer Wizard window with a message to select a
manufacturer and the model of the printer is displayed.
12. Click Have Disk....
The Install From Disk window is displayed.
13. Click Browse....
The Locate File window with a message “The device is not ready” is
displayed.
14. Click Cancel.
The Locate File window is displayed.