Philips KX-PNBC8 - Manual (Page 15)

15
3.1.2 When Printing via the Server Computer
Your print data is sent to a print server (the shared computer), then is sent from the
print server (the shared computer) to the printer. This method is recommended for
larger networks because it lets the print server manage the flow of print data.
This Network Card has four methods of printing via the server computer. Select the
method that best suits your need and proceed to the appropriate section.
[1] IP Peer-to-Peer printing using IP protocol
(Windows 95/Windows 98/Windows NT 4.0) .............................................. page 52
[2] LPR printing using IP protocol
(Windows 95/Windows 98/Windows NT 4.0) ............................................. page 79
[3] IPX Peer-to-Peer printing using IPX protocol
(Windows 95/ Windows 98)..........................................................................
page 69
[4] Printing using NetWare 3.X or NetWare 4.X or NetWare 5
as a server computer ................................................................................. page 85
Note: If you are using Windows 95/Windows 98 or Windows NT 4.0, the following
methods are recommended depending on the currently used network protocol.
- When using TCP/IP protocol ....................................................... Method [1] or [2]
- When using IPX/SPX protocol..................................................... Method [3]
- When using neither TCP/IP nor IPX/SPX protocol, method [3] is recommended
(The IPX/SPX protocol must be installed).