Paradyne FrameSaver SLV 9664 - Manual (Page 90)

Security and Logins
4-8 9664-A2-GB20-00 March 2000
Controlling SNMP Access
The FrameSaver unit supports SNMP Version 1, which provides limited security
through the use of community names. There are three methods for limiting SNMP
access:
H
Disabling SNMP access.
H Assigning SNMP community names and the access type.
H
Assigning IP addresses of those NMSs that can access the unit.
Disabling SNMP Access
When the SNMP access is disabled, the FrameSaver unit will not respond to
SNMP messages.
"
Procedure
To disable SNMP access:
1. Select the General SNMP Management options.
Main Menu
→
Configuration
→
Management and Communication
→
General SNMP Management
2. Disable the SNMP Management option.
3. Save your change.
See Configuring SNMP Management in Chapter 3, Configuration, for more
information about General SNMP Management configuration options.