Paradyne FrameSaver SLV 9664 - Manual (Page 204)

SNMP MIBs and Traps, and RMON Alarm Defaults
B-18 9664-A2-GB20-00 March 2000
DLCI Alarm Defaults – Paradyne Area
These alarms apply to all DLCIs on the network interface and can be created
during RMON initialization or when a DLCI is created. They are put into the
Paradyne alarm area.
Table B-11. DLCI Alarm Defaults – Paradyne Area
Item
Sample
Type
1 MIB/Tag/OID 2 Interval
Event
Type
Rising
Threshold
Default Falling
Threshold
Default
DLCI Inactive
Seconds D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciStsInactive-
Secs
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.2.1.2.I.D
900 secs
(15 mins) Rising 1 1
Missing Latency
Responses D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciMissedSLVs
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.1.1.23.I.D
900 secs
(15 mins) Rising 5 5
Rx FECNs D MIB: FR DTE MIB
(RFC 2115)
Tag: frCircuitReceivedFECNs
OID: .1.3.6.1.2.1.10.32.2.1.
4.I.D
60 secs
(1 min) Rising 1 1
Rx BECNs D MIB: FR DTE MIB
(RFC 2115)
Tag: frCircuitReceivedBECNs
OID: .1.3.6.1.2.1.10.32.2.1.
5.I.D
60 secs
(1 min) Rising 1 1
Congested Seconds D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciSts-
CongestedSecs
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.2.1.6.I.D
60 secs
(1 min) Rising 5 5
Frames Dropped by
Network D MIB: pdn_FrExt.mib (E)
Tag: devFrExtDlciNetDropFr
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9.4.1.1.20.I.D
60 secs
(1 min) Rising 1 1
1 D = Delta. Indicates that the calculated difference between the current value and the previous value is contained
in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
2 I in the OID = Interface ID of the frame relay link.
D = DLCI number.