Paradyne FrameSaver SLV 9664 - Manual (Page 21)

User Interface and Basic Operation
2-3 9664-A2-GB20-00 March 2000
If two sessions are already active, wait and try again.
H
If attempting to access the unit through Telnet, the local Telnet client process
returns a
Connection refused: message at the bottom of the screen.
H
If attempting to access the unit over the COM port, not via Telnet, the
User Interface Already In Use screen is redisplayed.
The type of connection (Telnet Connection or Direct COM Port Connection)
for each current user is identified, along with the user’s login ID.
"
Procedure
To end the session:
1. Press Ctrl-a to switch to the function keys area of the screen.
2. Type e ( Exit ) and press Enter.
— For a COM port-connected terminal or modem, the session is ended.
— For a Telnet connection, the session is closed and, if no other Telnet or
FTP session is occurring over the connection, the modem is
disconnected.
If ending a session from the Configuration branch, see Saving Configuration
Options in Chapter 3, Configuration.