Base servo torque/velocity mode, Control of vix drives 65 – Parker Products ViX250AE User Manual

Page 72

Text mode
Original mode

4. CONTROL OF VIX DRIVES 65

Base servo torque/velocity mode

This mode uses the servo analogue inputs to control the drive. Figure 4-3 shows a 6K
controller, used for control purposes. A double multi-core cable links the 6K and ViX with the
connections listed in Table 4-8.

FAULT

VELOCITY OR TORQUE MODE

Figure 4-3. Base Servo Mode Using Analogue Input Control

This manual is related to the following products:

ViX500AE