Planet Technology WGS3-2620 - Manual (Page 265)

WGS3 Layer 3 Switch User’s Manual - 257 -
Internet Control Message Protocol (ICMP)
Commonly used to send echo messages (i.e., Ping) for monitoring purposes.
IEEE 802.1D
Specifies a general method for the operation of MAC bridges, including the Spanning Tree Protocol.
IEEE 802.1Q
VLAN Tagging—Defines Ethernet frame tags which carry VLAN information. It allows switches to assign
end-stations to different virtual LANs, and defines a standard way for VLANs to communicate across
switched networks.
IEEE 802.3ac
Defines frame extensions for VLAN tagging.
Internet Group Management Protocol (IGMP)
A protocol through which hosts can register with their local router for multicast services. If there is more
than one multicast router on a given subnetwork, one of the routers is elected “querier” and assumes the
responsibility of keeping track of group membership.
IGMP Snooping
Listening to IGMP Query and IGMP Report packets transferred between IP Multicast Routers and IP
Multicast host groups to learn IP Multicast group members.
In-Band Management
Management of the network from a station attached directly to the network.
IP Multicast Filtering
A process whereby this switch can pass multicast traffic along to participating hosts.
Layer 2
Data Link layer in the ISO 7-Layer Data Communications Protocol. This is directly related to the
hardware interface for network devices and passes traffic based on MAC addresses.