Planet Technology WGS3-2620 - Manual (Page 181)

WGS3 Layer 3 Switch User’s Manual - 173 -
5.7.3.3 Reset Address Table Mode
WGS3-404 provide two address table modes, SVL (Shared VLAN Learning) and IVL (Independent VLAN
Learning).
SVL: Configuration and operation of the MAC address learning process with the same MAC address
table for all VLANs. If an individual MAC Address is learned in one VLAN, that learned information is
used in forwarding decisions taken for that address relative to all other VLANs. SVL is suitable when
you need to have asymmetric VLANs. Under normal circumstances, a pair of devices communicating in a
VLAN environment will both send and receive using the same VLAN. However, there are some
circumstances in which it is convenient to make use of two distinct VLANs, one used for A to transmit to
B: the other used for B to transmit to A.
IVL: Configuration and operation of the MAC address learning process with difference MAC address
table for all VLANs. If a given individual MAC Address is learned in one VLAN, that learned information is
not used in forwarding decisions taken for that address relative to any other VLAN. IVL is suitable when
two or more VLANs are connected by a bridge(switch) or there are duplicate MAC addresses on different
VLANs.
Parameter Default Description
Reset Address
Table Mode
SVL Specify the address table mode to be SVL or IVL.