Planet Technology WGS3-2620 User Manual

Page 2

WGS3 Layer 3 Switch User’s Manual

Trademarks

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their

respective owners.

Contents subject to revision without prior notice.

Disclaimer

Information furnished is believed to be accurate and reliable. However, no responsibility is assumed by

for its use, nor for any infringements of patents or other rights of third parties, which may result from its

use. No license is granted by implication or otherwise under any patent or patent rights. Right reserved to

change specifications at any time without notice.

The publisher assumes no responsibility for errors that may appear in this document, nor does it make

any commitment to update information it contains.

All brands and product names mentioned are trademarks or registered trademarks of their respective

companies.

Caution: Do not use a RJ-11 (telephone) cable to connect your network
equipment.
Important Safety Instructions

• Read all of these instructions.
• Save these instructions for later use.
• Follow all warnings and instructions marked on the product.
• Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

• Do not use this product near water.
• Do not place this product on an unstable cart or stand. The product may fall, causing serious

damage to the product.

• The air vent should never be blocked by placing the product on a bed, sofa, rug, or other similar

surface. This product should never be placed near or over a radiator or heat register. This

product should not be placed in a built-in installation unless proper ventilation is provided.

• This product should be operated from the type of power source indicated on the marking label. If

you are not sure of the type of power available, consult your dealer or local power company.

• This product is equipped with a three-wire grounding type plug, a plug having a third (grounding)

pin. This plug will only fit into a grounding type power outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, contact your electrician to replace your outlet. Do not

defeat the purpose of the grounding type plug.

• Do not allow anything to rest on the power cord. Do not place this product where persons will

walk on the cord.

• If an extension cord is used with this product, make sure that the total ampere ratings on the

products into the extension cord do not exceed the extension cord ampere rating. Also make

sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.

• Never push objects of any kind into this product through air ventilation slots as they may touch

dangerous voltage points or short out parts that could result in a risk of fire or electric shock.

Never spill liquid of any kind on the product.

• Do not attempt to service this product yourself, as opening or removing covers may expose you

to dangerous voltage points or other risks. Refer all servicing to service personnel.

• Warnings