beautypg.com

4 static unicast address table – Planet Technology WGS3-2620 User Manual

Page 169

background image

WGS3 Layer 3 Switch User’s Manual

- 161 -

5.7.1.4 Static Unicast Address Table

The Static Unicast Address Table can be used to assign the MAC address for a host device to a specific

port on this switch. Static unicast addresses are never aged out, and cannot be learned by another port.

If any packets with a source address specified in this table enter another port, they will be dropped. The

Static Unicast Address Table is described in the following figure and table.

Parameter Description

MAC Address

The MAC address of a host device attached to this switch.

Port

The port to which the host device is attached.

NOTE: To assign an address to a specific port, enter it in the MAC Address field, select the

corresponding port, and press Save. To delete an address, click

and press Delete for the

required entry.