Planet Technology WGS3-2620 - Manual (Page 223)

WGS3 Layer 3 Switch User’s Manual - 215 -
5.8.6.2 ARP Table
Address Resolution Protocol (ARP) defines a method for extracting a host’s Ethernet address from its
Internet address. This table shows the IP-to-MAC address cache discovered via ARP.
Parameter Description
IP Address IP addresses for which ARP has resolved the physical address through a broadcast
message.
MAC Address MAC address that maps to the corresponding IP address.
VLAN The VLAN group to which this host has been assigned.
Port The port this to which host device is attached. (Port “0” refers to an interface defined on
this switch.)
5.8.6.3 Routing Table
The Routing Table lists the routes through which all recognized Ethernet networks (and corresponding
VLANs) can be reached. This table includes all routes learned through routing protocols or manual
configuration.
Parameter Description
Destination
Network
A destination network, subnet or host.
Destination Mask The subnet mask that specifies the bits to match. A routing entry will be used for a
packet if the bits in the address set by the destination mask match the Destination
Network.