Custom tray length (optional procedure) – Printronix L5535 User Manual

Page 37

Custom Tray Length (Optional Procedure)

If your printer is equipped with the cut sheet paper feed option, it is
possible to override the standard cut sheet paper tray lengths. This
feature is called Custom Tray Length. The standard cut sheet paper
tray sizes are listed in the table on page 35. Using Custom Tray
Length and specially modified paper trays, it is possible to use
nonstandard paper stock that is longer or shorter than the standard
paper length. You can use nonstandard length paper only in the
lower tray.

If you are using the Custom Tray Length feature, use the control
panel to adjust the length of the image in the printer to match your
nonstandard length paper from the front panel.

To set a custom tray length, see Cut Sheet Options on the Paper
Control menu.

NOTE: The Custom Tray Length feature requires specially

modified paper trays.

Variable Length feature is enabled when the Variable Tray
Length is enabled, but the values are resumed after the
lower tray has been reconfigured to standard paper size.

Paper selection has to be set to the lower tray with a
custom tray inserted in order to make the variable tray
length available through the control panel.