Epson Stylus Pro 7000 - Manual (Page 97)

6-5
Maintaining and Transporting the Printer | 6-5
6. Select the row you chose in step 5 for each pattern (for example, row 4),
then click Finish.
If the set with the smallest gap is unclear and can’t be selected, click the
Realignment button and repeat from step 5.
Aligning the Print Head from the Control Panel
If you are using the RIP Station 5100 or a third party driver and you don’t
have the EPSON printer driver installed, you can align the print head using
the control panel.
• First you print a series of alignment or adjustment patterns.
• Then you determine which numbered row of patterns has the best
vertical alignment (smallest gaps). You enter the information on the
control panel to change the print head alignment.
Follow these steps to align the print head using the control panel:
1. Load roll paper in the printer, following the instructions on page 2-7.
2. Press the SelecType button until HEAD ALIGNMENT MENU is
displayed.
3. Press the Item button. PAPER THICK=STD appears on the display.
If you’re using EPSON paper, leave this setting on STD .