Epson Stylus Pro 7000 - Manual (Page 105)

6-13
Maintaining and Transporting the Printer | 6-13
You see the Speed and Progress dialog box:
5. Select from the following options:
• High Speed Copies speeds up printing of multiple copies of the
same document using hard disk space as a cache. If you have
multiple hard drives, you can select a high speed copy folder for
storing copies.
• Show Progress Meter lets you control whether or not the Progress
Meter is displayed when you send a print job.
• EPSON Printer Port (not available with Windows NT 4.0) lets you
optimize the transfer rate of your printer port for EPSON printers
instead of using the Windows default printer port. You may see one
of these messages beneath the
EPSON Printer Port option:
High speed (DMA) transfer enabled tells you that you’re already
using fast DMA transfer mode.
For higher data transfer rates, use DMA transfer lets you know
that you can speed up printing by enabling DMA transfers on your
system. See your electronic Reference Guide for instructions on using
DMA transfers, if your computer supports them. For more
information, see your computer documentation or contact your
computer manufacturer’s technical support.
If you see no message, you cannot enable DMA transfers on your
system.
If you have more than one hard
drive, you can select a folder for
storing multiple copy print jobs
here.
Not available with
Windows NT
Note
If you’re using Windows
NT, you may be able to
improve printing speed
by configuring your
parallel port. For more
information, see “Using
Port Configuration” in
your electronic Reference
Guide.