Epson Stylus Pro 7000 - Manual (Page 122)

7-12
7-12 | Resolving Problems
3. Open the roll paper cover and rewind the paper using the paper stop on
the right. Carefully pull down the jammed paper.
4. When TURN PWR OFF AND ON is displayed on the control panel,
close the lower cover, if necessary, then press the Power button to turn
the printer off. Press it again to turn the printer back on.
5. Make sure the Paper Out light is on and LOAD PAPER is displayed on
the control panel. Then reload your paper.
When you’re not printing on roll paper, make sure you secure the roll
with the roll paper belt. See page 2-7 for more information.
6. If you’re not going to continue printing, make sure the print head is in
the home (far right) position, as shown below. If it’s not, turn the
printer on, wait until the print head moves to the home position, then
turn off the printer.
Caution
If the print head is not
left in the home position,
print quality may decline.
print
head