Cutting roll paper manually, Cutting roll paper manually -11 – Epson Stylus Pro 7000 User Manual

Page 45

2-11

Handling Paper

2-11

9. To help paper feed out of the printer, pull out the two paper guides at

the bottom of the printer.

You can now send your print job.

Cutting Roll Paper Manually

When you’re not using the Auto Cut setting, you need to cut the paper
manually after your print job is finished. Follow these steps:

1. If the paper is not positioned correctly, press one of the

Paper Feed

buttons to adjust the paper position. Normally, you don’t need to do
this after a print job is finished.

2. Press the

Paper Source

button until the

Roll Auto Cut

light comes on.

3. Press the

Cut/Eject

button. The paper is cut.