Epson Stylus Pro 7000 - Manual (Page 35)

1
The EPSON Stylus Pro 7000 prints on a variety of media, including roll
paper and cut sheets up to 24 inches wide. The straight-through paper path
allows you to use heavy stock, including media up to 1.5 mm thick.
This chapter provides instructions for the following:
• Selecting paper and other media
• Printing on EPSON paper and film
• Using roll paper
• Using cut sheet paper
• Using the paper hammock with the printer stand
• Setting paper configurations
Selecting Paper and Other Media
You can print on most types of coated, glossy, plain paper, and other media.
You can also purchase an optional 3-inch spindle, which allows you to use
roll paper with a 3-inch core.
The following table shows the requirements for paper you can use in your
printer:
Always test samples of paper stock in the printer before purchasing large
quantities or printing large jobs. When you use non-EPSON papers or other
media, you may need to “profile” their thickness and ink drying time. See
page 2-21 for instructions.
Paper requirements
Roll paper Cut sheets
Size 8.27 to 24 in. wide
(210 to 610 mm) 8.5 × 11 in. to 24 × 36 in.
(up to 610 × 914 mm)
Maximum
roll diameter 5.90 in. (150 mm)
Thickness 0.08 to 0.5 mm 0.08 to 1.5 mm
Chapter 2:
Handling
Paper