Epson Stylus Pro 7000 - Manual (Page 26)

1-10
1-10 | Connecting Your Printer and Installing Drivers
Installing the Software and Setting Up Printer
Sharing in Windows
Make sure all computers meet the minimum system requirements. Then
follow the procedures for installing the software and checking the
installation. Depending on your network configuration, you may also want
to set up printer sharing. Instructions are provided for both Windows 95/98
and Windows NT.
Checking System Requirements
The memory requirements listed in the following table are for printing a
23
× 33-inch full-page color image. Requirements may vary, depending on
the size, complexity, and resolution of your images.
Installing the Software
Make sure any virus protection programs are turned off before you begin.
Then follow these steps to install your printer software:
1. Make sure the printer is connected and turned off, then turn on your
computer.
2. Insert your printer software CD-ROM.
System requirements
Component Minimum Recommended
Processor i486/25 MHz for Windows 95 and NT 4.0
i486/66 MHz for Windows 98 and 2000 Pentium ® II 300 MHz
or higher
OS Windows 95, 98, 2000, or Windows
NT 4.0
Available
memory 16MB RAM 128MB RAM or more
Hard disk
space 40MB free for installing the software For printing a file,
space equivalent to
double the file size
Monitor VGA Super VGA or better
CD-ROM Double-speed CD-ROM drive Quad-speed or faster