Epson Stylus Pro 7000 - Manual (Page 28)

1-12
1-12 | Connecting Your Printer and Installing Drivers
Checking USB Installation (Windows 98)
If you’re using a USB connection, it’s a good idea to confirm that the driver
is set up correctly after you install it. Follow these steps:
1. Click Start , point to Settings , and click Printers . Make sure your
EPSON Stylus Pro 7000 icon appears in the Printers window.
2. Right-click the icon, then click Properties .
3. Click the Details tab and note what is displayed under Print to the
following port.
You should see EPUSBx: (EPSON Stylus Pro 7000) . If you don’t see
the correct port displayed, see Chapter 7 in this guide or
“Troubleshooting” in the electronic Reference Guide on your printer
software CD-ROM.
Setting Up Printer Sharing in Windows 95 and 98
First, you need to set up the printer as a shared printer on the computer to
which it is connected. Then, you must specify the network path to the
printer from each computer that will use it.
Setting up the printer as a shared printer
Follow these steps to share a printer that is connected directly to your
computer with other computers on a network.
1. Click Start , point to Settings , then click Control Panel.
2. Double-click Network .
3. Click the File and Print Sharing button. You see the following: