Epson Stylus Pro 7000 - Manual (Page 20)

1-4
1-4 | Connecting Your Printer and Installing Drivers
8. Connect the appropriate cable to the card and to your network hub or
computer.
To remove an interface card, turn off the printer, unplug the power cord,
and follow the steps in reverse order.
Before you can use the EpsonNet Internal Print Server, you must configure
it for your network protocols and operating system. See the EpsonNet
Internal Print Server Administrator’s Manual for instructions.
Before you can print, you must install the printer software, as described on
page 1-7 (Macintosh) or page 1-10 (Windows).