Planar M46L - Manual (Page 51)

Adjusting Sharpness
m40L/m46L Installation & Configuration Guide 41
Adjusting Sharpness
After you set the Scale Mode to the one you will use for the program, select the
Sharpness level in the
PICTURE menu to reduce scaling artifacts. If you are not scaling
your image, you may skip this section.
Sharpness Settings
The Sharpness setting is in the PICTURE menu (press FREQ / PHASE
on the remote).
Sharpness settings determine how crisp the image should be. There are sixteen
levels of sharpness, where 0 is the softest and 15 is the sharpest. Seven is the default.
Make any adjustments to sharpness with the picture scaled, that is, with the Scale
Mode set the way you will use it. Use Sharpness to reduce artifacts of scaling.
Note: The Sharpness adjustments are in effect only when the image is scaled.
For instructions on how to set Scale Mode, see "Scale Mode Settings" on page 35.
P i c t u r e
S o u r c e S - Vi d e o
Vi d e o Sta n d a r d N T S C 6 0 H z / 3 . 5 8 M H z
Ve r t i c a l F r e q u e n c y ( f r a m e l o c k e d ) 6 0 H z
S h a r p n e s s 4
I n p u t L e v e l s