Planar M46L - Manual (Page 48)

Aspect Ratio Settings
38 m40L/m46L Installation & Configuration Guide
One to
One No distortion Fits width of image
without distortion;
fills height with
border Displays image without
distortion at actual size
with border on all sides Displays at native
resolution without
distortion
Example above
represents an XGA
input on an XGA
resolution display
(1024 x 768) Example above
represents a 1080i
(1920 x 1080)
resolution Example above
represents a VGA input Example above is for
1366 x 768 input on
1366 x 768 native
resolution or
1920 x 1080 input on
1920 x 1080 native
resolution
One to One maintains the original size and aspect ratio of the picture. This may leave blank areas on all four
sides. For instance, a VGA picture (640 x 480) on a 16 x 9 display will occupy only a small area in the center of
the screen. For UXGA sources on a 16 x 9 display, this will crop the picture top, bottom, and sides. The primary
use of One to One is to display the image without scaling artifacts and with minor cropping.
Note: The One to One Scale Mode will produce different cropping results and the image size will be different
for each input resolution.
Scale
Mode
Affect on Input Type on 4 x 3 Display Affect on Input Type on 16 x 9 Display
Standard Video or
VGA/SVGA/XGA 1080i or WXGA
Computer Source Standard Video,
VGA/SVGA/XGA, or 4 x 3 1080i or WXGA
Computer or 16 x 9
Source