Planar M46L User Manual

Page 34

Automatically Selecting the Source

m40L/m46L Installation & Configuration Guide

The

SOURCE

popup menu displays to the right of the

PICTURE

menu.

Note:

If the display does not have a VIM (Video Input Module) installed, only the first two

items will appear in this menu.

With the arrow keys, select the input connector you want and press

ENTER

Within a second or two the display analyzes the picture, adjusts to it, and displays
it. If you see no picture:

If you see an “out of range” message on the display, the input from the source
cannot be displayed. Try changing what the source is outputting.

If you see a “source absent” message on the display, the data from the source
is not reaching the display. Try disconnecting and reconnecting the cables
between the source and the display, and make sure the source is powered on.
If the source is a laptop, ensure that the VGA output on the rear of the source
is enabled.

If no message is displayed, maybe the source has timed out and is displaying
a blank screen.

A n a l o g

D i g i ta l

C o m p o n e n t ( Y P b P r )

S - Vi d e o

C o m p o s i t e

S D I