Panasonic 524X07801B - Manual (Page 91)

Section 700 - Operation Chapter 4. User Maintenance
576-13-700 DBS 576 (USA), Revised 6/11/98 91
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A
Set Mode Schedule
Description
(For a description of Automatic Day/Night System Mode, see “Automatic Day/Night Mode” on page
39.)
You can set the System to automatically enter None, Day 1, Day2, Night, Night (1), or Night (2)
modes based upon mode patterns. You can define up to 3 patterns with up to 5 modes for each day.
(This menu allows the setting of the patterns.)
Operation
To set the Mode Schedule:
Action Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 75.)
81-
User MAINT displays
2. At the 81 level, enter 07.
3. Press the HOLD key. 8107-
System Mode displays
4. Press the HOLD key. 0-
Mode Schedule displays
5. Press the HOLD key. 000 :HHMM
PTN 1-1 Start T displays
6. Enter the start time in hours (two characters) and minutes
(two characters) for the Pattern 1 - first mode.
Note: To clear an entry or existing data, press the FLASH
key.
7. Press the HOLD key. 001 :
PTN 1-1 Mode displays
8. Enter the desired mode for Pattern 1 - first (0 - None, 1 -
Day 1, 2 - Day 2, 3 - Night, 4 - Night (1), 5 - Night (2)).
Note: To clear an entry or existing data, press the FLASH
key.