To break into a call with a line appearance on you, To use extension busy override, Operation – Panasonic 524X07801B User Manual
Page 118: Hardware requirements, Related programming, Considerations

118
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 5. Key Telephone Features
Section 700 - Operation
Operation
To break into a call with a line appearance on your phone (CO Key Busy Override):
To use Extension Busy Override:
Hardware Requirements
•
N/A
Related Programming
•
FF1-0-01: Splash Tone (Busy Override)
•
FF1-0-03: Extension COS (Manual DND Override Send)
•
FF1-0-03: Extension COS (Forced DND Override)
•
FF1-2: Dial Plan
•
FF3: Extension COS
•
FF3: Data Security
Considerations
•
You cannot break in on three-party conference calls.
•
The default for the Override Alert Tone is off. If the Override Alert Tone is enabled, the tone will
be sent to both parties when a call is overridden.
Action
Result
1. Press the lit direct CO key.
• Alert tone sounds to both phones (Sys-
tem programming required)
• Connected to both parties
Action
Result
1. Lift the handset or press the ON/OFF key.
Intercom dial tone
2. Dial the extension number.
• Dialed extension number displays
• Busy tone
3. Enter the Busy Override code (default = 9).
• Alert tone sounds to both extensions
(System programming required)
• Connection to both parties
•
OVR1:
(
name of overriding exten-
sion
)
and
OVR2:
(
extension name for
current talk path
)
displays on both
extensions