After receiving an offhook signal during a call, Offhook voice announce, To make an ohva – Panasonic 524X07801B User Manual
Page 171
Section 700 - Operation
Chapter 5. Key Telephone Features
576-13-700
DBS 576 (USA), Revised 6/11/98
171
Operation
After receiving an offhook signal during a call:
Note:
For details about handling multiple calls, see “Call Hold” on page 124.
Hardware Requirements
•
N/A
Related Programming
•
FF3: CO Off-Hook Signal.
Considerations
•
The CO call type may be multiple ring, direct, BLF Ring, or camp-on.
•
The System does not send the offhook signal under the following conditions:
• During a conference call
• During an OHVA or Busy override
• Data Privacy is enabled
• the receiving telephone is a 3rd party voice mail.
Offhook Voice Announce
All Versions
Description
You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice
Announce (OHVA) feature to make an announcement that only the called party can hear. You can also
transfer a held call to a busy extension after making the announcement using this feature. The called
party may optionally reply to (answer) an OHVA call.
Operation
To make an OHVA :
Action
Result
1. Press the HOLD key.
First call on hold
2. Press the flashing FF key for the CO line of the incoming
call.
Action
Result
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
Busy signal