Trunk access groups, To access a trunk group – Panasonic 524X07801B User Manual
Page 66

66
DBS 576 (USA), Revised 6/11/98
576-13-700
Chapter 3. System Features
Section 700 - Operation
•
TRS can restrict the use of the star (*) or pound (#) digits on a TRS class basis.
The following calling restrictions are also available:
•
Forced ARS Restriction (The ARS feature controls outside calls.)
Hardware Requirements
•
N/A
Related Programming
•
N/A
Considerations
•
The dialing restrictions included in this feature help prevent unauthorized outgoing calls. It is
possible; however, to program your System to allow SSD to override TRS.
•
For more information on ARS/TRS, see the ARS/TRS Reference Manual.
Trunk Access Groups
Description
Trunks can be placed in trunk groups. When a trunk group is accessed, the System automatically
selects an open trunk from the group.
Operation
To access a trunk group:
Hardware Requirements
•
N/A
Related Programming
•
FF1-3: MCO Access
Considerations
•
Trunks can only appear in one trunk group.
•
If Automatic Call Routing is enabled, the MCO access code (9 by default) automatically
accesses the Automatic Route Selection (ARS) features.
Action
Result
1. Enter a trunk access code (default trunk group access codes
are 9 or 81-84).
2. Dial the phone number.