Panasonic 524X07801B - Manual (Page 230)

230 DBS 576 (USA), Revised 6/11/98 576-13-700
Chapter 6. DSLT Features Section 700 - Operation
Flash
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
You can send a flash signal on your telephone to release an outside line and then either automatically
reseize the same outside line or switch to extension dial tone status by pressing the FLASH key.
Trunk programming determines whether your phone reseizes the outside line or switches to extension
dial tone status.
Hardware Requirements
• N/A
Related Programming
• FF1-1: Flash Timer
• FF2: Flash Pattern
• FF2: Flash Key Operation
• FF3: Flash on PROG (Recall)
Considerations
• N/A
Hot Line
CPC-96, CPC-288, and CPC-576 Version 1.0
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number
simply by lifting the handset. You do not have to dial any digits.
Operation
To immediately connect to a pre-assigned extension or speed dial number:
Hardware Requirements
• N/A
Related Programming
• FF5-5: Hot Line
Action Result
1. Lift the handset or press the ON/OFF key. Automatically connected to pre-assigned
extension or speed dial number